Provide phantom power switch and gain adjustment 2CH Dante audio network audio transmitter
Introduction:
This product supports two sets of balanced I/O analog signals access to the Dante system through a local network. Use the XLR input interface and provides the function of the phantom power and the input signal gain adjustment.
The output interface is a standard three pin XLR socket, analog signal output balance. The four output version can be selected. RJ45 network interface, please use CAT5 or above to connect the PoE switch.
Function:
- For analog signal and Dante signal conversion.
- Support 2 channel analog input, 2 channel analog output.
- Support 2 channel Dante input, 2 channel Dante output.
- The input channel has an phantom power switch and a gain manual adjustment knob.
- PoE power supply, 802.3af, 802.3at standard PoE switch.
- Front panel independent power indicator
Specification:
 |
| Product Model No. | DP22 | | Analog input channel | 2 | | Analog output channel | 2 | | Dante input channel | 2 | | Dante output channel | 2 | | Dante interface | 1 | | Input gain amplification | Rotary gain knob (0 ~ 20dB) | | Balanced/non-balanced, input/output support | √ | | MICLINE, input/output support | √ | | 48V phantom power switch | √ | | Sampling rate | 48kHz | | Phantom power | 48V | | Frequency Response (20~20KHz) | 20Hz ～ 20K Hz,±0.5dB | | THD+N | ≦0.005% @4dBu | | Digital-analog dynamic range (A weighting) | 120dB | | Analog - digital dynamic range (A weighting) | 114dB | | Input impedance (balanced) | 20kΩ | | Output impedance (balanced) | 100Ω | | EIN(A weighting) | ≤-131 dBu | | Channel isolation @1kHz | 100dB @1k Hz,4dBu | | Simulated maximum gain | 20dB | | Common-mode rejection | 80dB @80 Hz | | Maximum input level | 18dBu | | Maximum output level | 18dBu | | Ground Noise | -90dBu | | System delay | ≤3ms | | Working Power Supply | PoE 48V | | Operating temperature | '-10-50℃ | | Size | 87*97*46(mm) | |
Application:
FAQ:
Q1: Are you manufacturer or trade company?
A: We are manufacturer,which located in Shenzhen, Guangdong, China.
Q2: Do you offer OEM&ODM service?
A: Yes, We can provide OEM or ODM Solution depends on client requirements
Q3: What's the quality standard of your products?
A: Our products has approved CE, ROHS certification.
Q4: Which place will use FHB equipment?
A: Our products are widely used in International Conference, Governments, Banks, Churches, Airports, Parliaments, Education institutes, Hotel, Private corporate conference hall etc,.
Q5: What’s the delivery time?
A:Sample order: During 5days,Bulk order:10-15days
Check Products one by one, to make sure all products are working excellent quality..
Product Tags:
|
|
Phantom Power Switch Network Audio Transmitter CAT5 2CH Dante Audio Images
|
